Helmuts Hobbies
e-Shopping

HO Digital Shop      

The items on this page are in stock and ready to ship as indicated by the signals. 

Prices are based on discounted list prices at the time this page was updated and may vary higher or lower on your final invoice if retail prices have changed. 

Click on images to enlarge

Item
Number

suitable for use with HO, Märklin I and LGB
Power Supply NOT Included

 suitable for use with HO, Märklin I and LGB
Power Supply NOT Included

Requires 60116 and 66367 to make a complete powered digital control system

Turnout motor front end circuit board

for the m 83 decoder. It is for using turnout mechanisms with motors with an end shutoff feature in the end stop position. This can only be used in conjunction with the m 83 (60831/60832). When you are operating such mechanisms with the m 83, you can program the set speed as well as a slow approach to the end position.

Connecting Cable
-for direct connections between several 60213-60215, 60216, 60226 Central Stations and for connecting to the 60125/60145 Terminal. Length approximately 2 meters / 79 inches.

Extension Cable
-for the main line comes with a 9-pin socket and a 9-pin plug to connect a distant 60125/60145 Terminal. Length approximately 2 meters / 79 inches.

Converter
This unit is a current inverter for the 66630/66361 & 60041/60061 switched mode power packs to change the voltage from DC to AC or for connections with accessories using DC voltage.

Terminal
Connections can be made for additional devices from the digital program to the Central Station. The unit has a permanent 9-conductor connecting cable, 60 cm / 23-5/8" long (can be extended with 60126) and a 9-pin socket for another Terminal or for other devices to the main line. Four (4) 7-pin sockets for connections from the Mobile Station (60124 adapter cable necessary) or other peripheral devices.